Production vCenter: 192.168.1.10 (ESXi: 192.168.1.101, 192.168.1.102, 192.168.1.103) - 有vCenter 這3個其實不用理會
Production Network: 192.168.1.0/24
Production ESXi interface: vLan192
SureBackup用的ESXi: 192.168.1.25
必需有一個和Prodution interface一樣的interface : vLan192, 但vLan ID可以不同
Host:設定為192.168.1.25 (ESXi用於SureBackup test), 會建立一個Virtual Lab VM
Production Network設 vLan192
IPv4 address: DHCP 或者 設定一個Veeam B&R可以Connection的IP
以下的圖片以192.168.1.25角度去設定
Production network需要選擇192.168.1.25裏面的Interface, 而這個Interface必需和Production VM相同
Isolated network保留Default就可以, 只是名稱來
VLAN ID是這個192.168.1.25裏面vLan192的ID, 可以和Production不同
IP & Mask填寫Production network, 和用於ping test, Masquerade network我還未測試, 應該是用於Production連接到Lab的時候, 中間的NAT, 先用Default吧
Lab name: Veeam Virtual Lab
Host name: 192.168.1.25
Datastore: datastore1
Appliance:
Name: Veeam_Virtual_Lab
Resource pool: Veeam Virtual Lab
Production network: vLan192
IPv4 address: 192.168.1.30
IPv4 subnet mask: 255.255.255.0
IPv4 default gateway: 192.168.1.254
IPv4 preferred DNS server: 192.168.1.51
IPv4 alternate DNS server: 192.168.1.52
Network configuration type: advanced single-host
Network options:
Isolated network: Veeam Virtual Lab vLan192
IPv4 masquerade address: 192.168.255.0
IPv4 appliance address: 192.168.1.254
IPv4 DHCP: enabled
Network mapping:
vLan192 --> Veeam Virtual Lab vLan192
設定Application Group
Custom 的測試, 預設的Web Server只測試port 80
HTTPS
C:\Program Files\Veeam\Backup and Replication\Backup\Veeam.Backup.ConnectionTester.exe
%vm_ip% 443
設定SureBackup Job
測試成功, 這個Web server只有port 80, 所以port 443不通
